#CINEBENCH R20 VS R23 SOFTWARE#

This (with rgb bloat ware etc not running) gives me around a 9100-9200 R20 score with max pump/fan speed on a 360 closed water loop. Set your core voltage to manual, (leave it at default) then throw in a negative voltage offset by -0.1v. Using all core load (folding in my case) the case temps levelled off at 94c with max pump speed and fans, with a 23c ambient.īeing as this was not acceptable 24/7 temps I ended up eventually going with the latest (1.0.0.4b agesa) with everything left on AUTO. This will get you the highest score I've found so far, However even with my 360 AiO water cooler at max fan/pump speeds on agesa 1.0.0.3 ABBA with these settings the heat is absolutely insane. Where you 'might be good' with a single threaded task running a 58c temp, and lower fan/pump speeds, you will boost higher (and consequently higher scores with cooler temperatures.) Precision boost 2 will ramp up the clock based off of 3 things, but the important one is temprature.

#CINEBENCH R20 VS R23 SOFTWARE#

ack with naming conventions AMD)Īlso disable and close all RGB software (and related bloatware services, Asus being the largest offender, followed by corsair and gigabyte bloat ware for RGB in second place tie) but not precision boost, or PBO, (it's auto oc) which is used in conjunction with PBO, but not part of PBO itself, yet found in it's menu.

(which is yet another feature, but found in the PBO menu. With PBO on, all power limits removed with +200 mhz (auto over clock) Running temps are about mid 70's for the test (under sustained loads I'm around 82-83c with around a 24c ambient temp)īest benchmarks as of time of this post and agesa bios release 1.0.0.4b being the latest microcode update/bios release, the best results I've got were on agesa 1.0.0.3 abba bios revision.įor highest benchmarks in my experience do the following.īios revision for your mainboard with the 1.0.0.3 ABBA Agesa. I'm using a 360 AIO with 100% pump and fan speeds. I run an x570 aorus xtreme board, with the latest (agesa 1.0.0.4b as of Feb 8th 2020) I get around 9200-9300 'ish' on R20 with multicore test. (no gains on agesa 1.0.0.4b) also voids your warranty. Precision booster *Overdrive* will simply lessen (or remove) the power restrictions on the cpu, which rarely if ever is needed in my experience.

PBO is not short hand for precision boost.* * They are two completely different things with a poor naming convention. Precision boost overclocking (PBO) is not to be confused with precision boost, The motherboard and bios revision (agesa version more specifically) Precision Boost 2, will clock your cpu (resulting in higher scores in R20), the stepping is almost always limited by temperature.

Cinebench r20 vs r23